2007 Gehl 1648 Plus Paver 8'-13' screed
VISIBILITY • The low back wall design allows the operator to easily see the asphalt hopper, truck position and front mainframe region when paving. • The 1648 Plus model has a height of 57” • Competitive machines do not offer this type of visibility.
NARROW MACHINE WIDTH • Fold-up hopper wings result in an overall width of 8’6” making transportation more economical and efficient. • The short machine width requires less trailer space, allowing more room for additional equipment like an asphalt roller.
ASPHALT HOPPER FRONT LIP • Retains asphalt within the paver’s hopper assembly as the truck unloads and pulls away. • This protects the ground drive system from undue contamination and produces a more even finished mat.
SCREED • Full-floating, adjustable, vibratory and heated screeds are standard on the Power Box Series. • The 8’ width and 13” length of the main screed provides a solid foundation for smooth, accurate, finished asphalt mats.
• Crown, invert and pitch adjustments are provided through screw-type jacks located at the center and ends of the main screed assembly. • These adjustments allow the operator to maintain a consistent depth and develop drainage contours with the mat. • A propane burner system, standard on the 1648 Plus, provides heat to the screed.
• This preheating function is required to prevent asphalt from bonding to the screed’s wear plat and scoring the mat finish.
MATERIAL AUGER SYSTEM • On the 1648 Plus model, the auger system can be ordered from the factory either mounted to the screed extensions or to the material shut-off gates, depending on customer preference and asphalt conditions.
MATERIAL SHUT-OFF GATES • Box-constructed material shut-off gates add extra strength and reliability to a very demanding area of the paver design. • Cylinder attachment point designed for excellent durability and reliability.
GROUND DRIVE • Direct-drive type track design that will not slip under normal /severe conditions. This provides the customer more versatility in different sub-base conditions. • This system self-cleans and tensions itself with the aid of a hydraulic cylinder. Track pads are made from cast steel providing the customer both durability and reliability over many years.
HYDROSTATIC DRIVE SYSTEM • All Gehl Power Box pavers have a variable hydrostatic pump design that provides smooth acceleration. • infinite control of the hydraulic track motors or wheel motors standard on the 1648 Plus. • The smooth acceleration and infinite settings give the customer good mat thickness and consistency..
SERVICEABILITY • With engine access from both sides, servicing the entire engine assembly is made more efficient. • With the engine access panel removed, access to the alternator and starter is unobstructed. Other manufacturers require the engine assembly to be totally removed. • Engine can be serviced from both sides, and provides easy access to hoses and other components for simple maintenance.
Overall Height 7’1″
Transport Width 8’6″
Operating Width 10’5″
Truck Clearance 23″
Operating Weight 10,600 lbs.
Fuel Tank 12.5 gal.
Hydraulic Reservoir 20 gal.
Gross Horsepower 48 hp @ 3000 rpm
Full Floating & Adjustable Width 8′-13′
Vibratory 3000 vpm
Screed Heating Medium
Hydraulic Extension 30″ w/wear plate
Crown/Invert Adjustment Single Lever, 0-3″
Independent Gates Standard
Asphalt Hopper Capacity 6 tons
Asphalt Hopper Style Gravity Flow
Material Auger Location Gates/Screed
Speed Single, 1-130 fpm
Steel Track Pad Size 12″ x 3″
Steel Track Length 48″
Steering Valve Standard
Platform Isolated Dual Span
Control Location Dual, L&R Sides
Wash-Down Stations Dual Nozzle, 5.5 gal.
Hydrostatic Drive Pump Flow 37.0 gpm
Hydraulic Auger Drive Pump Flow 10.9 gpm
Hydraulic Cylinder Pump Flow 10.9 gpm
Hydraulic Oil Cooler Capacity 12.0 gpm