CID Standard Duty Skid Steer Brush Cutter Attachment

Standard Duty Skid Steer Brush Cutter Attachment

Our Standard Duty Skid Steer Brush Cutter Attachment comes with a 60″ or 72″ mowing deck. It features a 40 HP gear box and stump jumper. A flow of 11-20 gpm is required. Optional mesh grill is available on open front model. The Standard Duty Brush Cutter is for the person who works with light brush on smaller or infrequent jobs.

Standard Duty Skid Steer Brush Cutter Attachment Specs.

Standard Low Flow Brush Cutter 11 GPM – 20 GPM

  • 3’’ Cutting Capacity.
  • 3/16’’ Deck with 3/8″ A36 reinforced sides.
  • 40 HP Right Angle gear box.
  • 2 blades with stump jumper.
  • High torque Motor with 3000 PSI Relief Valve.
  • Does not require a case drain.
  • Optional Mesh Grill Available on Open Front.
Standard Duty Skid Steer Brush Cutter Attachment Specs

Standard-BrushCutter-spec

Standard Duty Skid Steer Brush Cutter Attachment Specs

standard-duty-open-front-BRUSHCUTTER-spec

Contact King Machinery

6 + 10 =